Opens in a new tab

Stationery & Office Supplies Packing Solutions

Pencils, erasers, sharpeners and office consumables — low-value, high-count products where the sealed counted pack is the shelf unit.

Why Flow Wrapping for Stationery

Stationery packing is a count-and-price story — film replaces the carton and the pack does the merchandising.

The Pack Is the Shelf Unit

Counted pencil packs hang, stack and sell as one — no carton, no blister card, no air.

Counted by Nature

Pencils and erasers sell by count — the count that enters the wrapper is the count the buyer pays for.

Printed Film Sells

Bright registered print carries brand and price point — the wrap is the packaging graphics.

Protect the Points

Wood-cased points break in transit — counted packs hold every pencil aligned and intact.

Back-to-School Scale

Seasonal peaks demand quick changeovers between counts and print designs.

Industry References

Commodity pencils sell in flow-wrapped counted packs at stationery chains — the pack is the shelf unit.
Erasers and sharpeners sell as sealed counted packs in printed film — low unit values where the pack does the selling.

Machines for Stationery

One engineering standard across three machine families — flow wrappers, four-side-seal sachet machines and horizontal premade-pouch lines. Every machine below is configured around the product it runs — each card links to the full machine page for detailed specs.

Flow Wrapping (HFFS) — counted stationery packs

Counted-pack configurations — infeed and film width sized to the product and count.
jc250 flow wrapping machine

JC250 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-100 mm, length 85-300 mm, height 5-30 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-240 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 600 kg
Dimensions (L×W×H): 4000 × 920 × 1500 mm
View Machine
jc420 flow wrapping machine

JC420 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-180 mm, length 115-350 mm, height 5-45 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-430 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 800 kg
Dimensions (L×W×H): 4220 × 950 × 1600 mm
View Machine
PP180R Flow Wrapping Machine

PP180R Flow Wrapping Machine

Production Rate: 4,800 packs/hour (80 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, slurries, powders and similar products
Packaging Films: PE, PP, CPP, OPP, PET, PA (NY), VMPET, VMCPP foil laminates and aluminum-foil paper bags
Pack Size Range: Width 60-90 mm, height 80-150 mm
Max. Filling Volume: 100 ml (depends on product type)
Filling Accuracy: ±1.5%
Filling Stations: 2
Pack Style: Pillow packs (back seal) formed from roll film
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Total Power: 10 kW, 380 V / 50 Hz
Machine Weight: 2,000 kg
Dimensions (L×W×H): 4500 × 970 × 1500 mm
Frame Material: 304 stainless steel covers; carbon-steel body with spray coating
Core Components: Mitsubishi PLC; Weintek touchscreen HMI; Siemens low-voltage electrics; relays by Siemens or Schneider; Italian photo-eye registration
View Machine

Four-Side-Seal Sachet Machines — flat sachets and portion packs

Flat sachets sealed on all four sides — portion-controlled, shelf-ready packs for flat products and counted single serves.
jc800z multi-lane patch packing machine

JC800Z Patch Packing Machine

Production Rate: 50-180 packs/min
Sealing Lanes: 2 (zipper-dedicated build)
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Width: 880 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Zipper: Double-side zipper heating system
Feeders: 2 rotary soft-gel patch feeders with loading magazines
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
View Machine
jc400 four-side-seal patch packing machine

JC400 Four-Side-Seal Patch Packing Machine

Production Rate: 80-180 packs/min
Pack Size Range: Length 100-280 mm, width 85-160 mm, height 1-10 mm
Product Height Limit: 10 mm maximum
Max. Film Width: 400 mm
Max. Film Reel Dia.: 400 mm
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other single- or double-layer heat-sealable laminates
Drive: Full servo control system
Feeder: Custom-made 2-station pushing-type feeder (hand-loaded)
Printing: Ink-wheel printer standard; ink-jet option (20 languages; dates, QR and barcodes, logo marks; up to 406 m/min)
Film Handling: Auto tension controller; 2 servo film-direction correction devices plus master correction sensor on the back film frame
Quality Control: Optical fiber detection with kick-out station
Control Set: Panasonic PLC; MCGS or YiFan touchscreen; Inovance servo motors and drivers; AirTAC/SMC valves; Panasonic photoelectronics
Total Power: 10 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,000 kg
View Machine
jc700 multi-lane sachet packing machine

JC700 Sachet Packing Machine

Production Rate: 50-180 packs/min
Sealing Lanes: 2-5, built to order
Max. Film Width: 700 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
View Machine
jc600 multi-lane sachet packing machine

JC600 Sachet Packing Machine

Production Rate: 50-180 packs/min
Sealing Lanes: 2-4, built to order
Max. Film Width: 600 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
View Machine
jc800 multi-lane sachet packing machine

JC800 Sachet Packing Machine

Production Rate: 50-180 packs/min
Sealing Lanes: 2-6, built to order
Max. Film Width: 880 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film-curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
View Machine

Horizontal Pouch Packing Machines — stand-up, zipper and spout pouches

Pouch formats for office sets and refill counts — configuration confirmed per format.

Complete the Line — cartoning, blister and sleeving

Cartoning, blister packing and bag sleeving machines that pair with the packers above — one line, one engineering standard. The line does not end at the seal — carton with JC130 or JCH200, blister-pack with JCP100, JCP180 or JCP270, sleeve with JCJ130 or JCS130.
jc130 horizontal cartoning machine

JC130 Horizontal Cartoning Machine

Production Rate: 20-60 cartons/min (carton- and product-dependent)
Carton Material: 250-400 g/m² board
Carton Size Range (L×W×H): 70-210 mm × 60-150 mm × 15-60 mm
Medical-Build Window: Quoted medical build verified at 80-110 × 80-110 × 30-90 mm — checked per carton
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Feeding: 4-station product auto feeder; 5- and 10-station feeders to order; carton erecting, insertion and sealing
Options: Leaflet folding device; glue-sealing unit; single-side label sealing unit
Rejection: Auto-reject for cartons missing product or leaflet; overload auto-stop
Control Set: Siemens PLC, touchscreen, frequency converter and servo; SMC valves, cylinders, vacuum and air preparation; Sick and Omron sensors
Compressed Air: ≥0.6 MPa, 120-160 L/min
Total Power: 1.5 kW, 220/380 V / 50 Hz
Machine Weight: 2,800 kg
Dimensions (L×W×H): 4620 × 1210 × 1800 mm
View Machine
jch200 high-speed cartoning machine

JCH200 High-Speed Cartoning Machine

Production Rate: 200 cartons/min
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Product Family: Coffee and snack pouches, sachet multipacks, bottled pharma, kit sets — the JC cartoning range
Configuration: Built to order around your carton and product
View Machine
JCJ130 compact bag sleeving machine with infeed conveyor

JCJ130 Compact Bag Sleeving Machine

Sealing Modes: (1) single-layer OPP film, heat-sealed; (2) OPP bags with double-sided adhesive-tape seal; (3) laminated premade bags
Bag Supply: OPP roll film and premade bags
Best-Fit Products: Stationery, red envelopes, kraft envelopes, awkward flat goods
Build Tier: Compact build — the JCS130 is the standard production build
View Machine
JCS130 standard bag sleeving machine

JCS130 Standard Bag Sleeving Machine

Bagging Speed: 30-50 bags/min (product dependent)
Pack Size (L x W x H): 80-300 mm x 80-240 mm, height up to 40 mm
Bag Supply: OPP roll film, max roll dia. 450 mm
Sealing Method: Self-adhesive closure, no heat applied
Power Supply: 220 V / 50 Hz
Compressed Air: 0.6-0.8 MPa
Total Power: 5 kW
Machine Weight: 1,600 kg
Footprint (L x W x H): 2,500 x 4,600 x 1,600 mm
Control System: Omron NX1P2 PLC, NB7W touch HMI
Servo System: Inovance servo drive, Omron motion module
Pneumatics: SMC valves, AirTac cylinders
Best-Fit Products: Stationery, red envelopes, kraft envelopes, flat print goods
Build Tier: Standard production build — the JCJ130 is the compact build
View Machine

How to Choose a Stationery Packing Machine

Eight decisions frame the specification. Work them in order and the machine ends up matched to your product — not the other way around.

1. Product Type

Pencil, eraser, sharpener or full school set. Count and geometry drive the infeed.

2. Throughput

Seasonal peaks reward quick changeover — size the class to the annual cycle, not the peak week.

3. Film Material

Printed film for retail, plain film for bulk — registration quality decides shelf appeal.

4. Seal Technology

Seals on light film at high counts, validated with your actual product.

5. Package Format

Counted packs or sets. Format drives grouping and film width.

6. Fragile Points

Wood-cased points and brittle plastics mark easily — conveying must arrive at the film oriented and unscuffed.

7. Configuration and Delivery

Counting and set assembly extends delivery. Lock the counts per season early.

8. Run the Numbers

Shortlist machines before you quote — enter product size, format and target output in the free selector at tool.path-pack.com; it returns matching machine families and film widths in one pass.

Frequently Asked Questions

Can stationery be flow wrapped?

Yes — counted pencils and components convey into film and seal as shelf-ready packs. Point protection and print registration set the focus.

How do school sets bundle?

Grouped sets seal as one counted pack with contents defined infeed — set content drives the grouping design.

Retail packs or bulk?

Same route, different film — plain film for bulk counts, print-registered film where the pack is the shelf unit.

What speeds are available for stationery packing?

Configurations for this format span our full flow-wrapping range — 5 to 300 packs/min. The right class depends on your product, film and format; match speed to what your line actually sustains, not the headline number.

Why Path Pack

We start with the product, not the machine. Every project runs through the same nine-step engineering process — product, format, film, speed, feeding, sealing, structure, integration, testing — before a configuration is quoted.
Your products run on real machines with your film at your target speed before anything ships. Seasonal count formats are exactly what the configuration review is for.
Evaluate your requirements with our online tools: the machine finder and bag calculator narrow the configuration before you ever talk to us.

Have a Packaging Problem Worth Solving?

×

Do you have questions about packaging machines? Do not hesitate to contact us.

Your email goes directly to our co-founder’s inbox and our sales team.

We will reply within One Working Day.

1