Opens in a new tab

Bamboo & Wooden Products Packing Solutions

Skewers, stirrers, craft sticks and slender wood products — long, light and counted by the hundred into one sealed pack.

Why Flow Wrapping for Bamboo & Wooden Products

Slender-product packing is a count story — the pack is the count, and the film replaces the carton entirely.

Count Is the Product

Sticks sell by count — fifty skewers, a hundred stirrers. Counting sits ahead of the wrapper, and the seal locks the count.

Long, Light, Horizontal

Slender wood products convey naturally lying down — the shape horizontal conveying was built for.

Dust Stays In

Rough-cut wood sheds dust and slivers — sealed packs keep the debris in and the retail shelf clean.

Dimensional Wildness

Natural products vary piece to piece; the infeed tolerates the variation without jamming.

End-of-Life Rules the Film

Plastic-free and compostable targets increasingly shape the category — film choice follows the market's disposal story.

Industry References

Bamboo skewers sell by the hundred in sealed counted packs — count is the product.
Wooden stirrers and craft sticks sell in counted packs across retail and catering supply — commodity counts where film replaces the carton.

Machines for Bamboo & Wooden Products

One engineering standard across three machine families — flow wrappers, four-side-seal sachet machines and horizontal premade-pouch lines. Every machine below is configured around the product it runs — each card links to the full machine page for detailed specs.

Flow Wrapping (HFFS) — counted slender-product packs

Count configurations — infeed and film width sized to the longest product.
jc250 flow wrapping machine

JC250 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-100 mm, length 85-300 mm, height 5-30 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-240 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 600 kg
Dimensions (L×W×H): 4000 × 920 × 1500 mm
View Machine
jc420 flow wrapping machine

JC420 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-180 mm, length 115-350 mm, height 5-45 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-430 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 800 kg
Dimensions (L×W×H): 4220 × 950 × 1600 mm
View Machine
PP180R Flow Wrapping Machine

PP180R Flow Wrapping Machine

Production Rate: 4,800 packs/hour (80 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, slurries, powders and similar products
Packaging Films: PE, PP, CPP, OPP, PET, PA (NY), VMPET, VMCPP foil laminates and aluminum-foil paper bags
Pack Size Range: Width 60-90 mm, height 80-150 mm
Max. Filling Volume: 100 ml (depends on product type)
Filling Accuracy: ±1.5%
Filling Stations: 2
Pack Style: Pillow packs (back seal) formed from roll film
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Total Power: 10 kW, 380 V / 50 Hz
Machine Weight: 2,000 kg
Dimensions (L×W×H): 4500 × 970 × 1500 mm
Frame Material: 304 stainless steel covers; carbon-steel body with spray coating
Core Components: Mitsubishi PLC; Weintek touchscreen HMI; Siemens low-voltage electrics; relays by Siemens or Schneider; Italian photo-eye registration
View Machine

Four-Side-Seal Sachet Machines — flat sachets and portion packs

Flat sachets sealed on all four sides — portion-controlled, shelf-ready packs for flat products and counted single serves.

Horizontal Pouch Packing Machines — stand-up, zipper and spout pouches

Pouch formats for bulk counts — configuration confirmed per format.

Complete the Line — cartoning, blister and sleeving

Cartoning, blister packing and bag sleeving machines that pair with the packers above — one line, one engineering standard. One partner from film to case: cartoning on the JC130 and JCH200, blister lines on the JCP100, JCP180 and JCP270, bag sleeving on the JCJ130 and JCS130.
jc130 horizontal cartoning machine

JC130 Horizontal Cartoning Machine

Production Rate: 20-60 cartons/min (carton- and product-dependent)
Carton Material: 250-400 g/m² board
Carton Size Range (L×W×H): 70-210 mm × 60-150 mm × 15-60 mm
Medical-Build Window: Quoted medical build verified at 80-110 × 80-110 × 30-90 mm — checked per carton
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Feeding: 4-station product auto feeder; 5- and 10-station feeders to order; carton erecting, insertion and sealing
Options: Leaflet folding device; glue-sealing unit; single-side label sealing unit
Rejection: Auto-reject for cartons missing product or leaflet; overload auto-stop
Control Set: Siemens PLC, touchscreen, frequency converter and servo; SMC valves, cylinders, vacuum and air preparation; Sick and Omron sensors
Compressed Air: ≥0.6 MPa, 120-160 L/min
Total Power: 1.5 kW, 220/380 V / 50 Hz
Machine Weight: 2,800 kg
Dimensions (L×W×H): 4620 × 1210 × 1800 mm
View Machine
jch200 high-speed cartoning machine

JCH200 High-Speed Cartoning Machine

Production Rate: 200 cartons/min
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Product Family: Coffee and snack pouches, sachet multipacks, bottled pharma, kit sets — the JC cartoning range
Configuration: Built to order around your carton and product
View Machine
JCJ130 compact bag sleeving machine with infeed conveyor

JCJ130 Compact Bag Sleeving Machine

Sealing Modes: (1) single-layer OPP film, heat-sealed; (2) OPP bags with double-sided adhesive-tape seal; (3) laminated premade bags
Bag Supply: OPP roll film and premade bags
Best-Fit Products: Stationery, red envelopes, kraft envelopes, awkward flat goods
Build Tier: Compact build — the JCS130 is the standard production build
View Machine
JCS130 standard bag sleeving machine

JCS130 Standard Bag Sleeving Machine

Bagging Speed: 30-50 bags/min (product dependent)
Pack Size (L x W x H): 80-300 mm x 80-240 mm, height up to 40 mm
Bag Supply: OPP roll film, max roll dia. 450 mm
Sealing Method: Self-adhesive closure, no heat applied
Power Supply: 220 V / 50 Hz
Compressed Air: 0.6-0.8 MPa
Total Power: 5 kW
Machine Weight: 1,600 kg
Footprint (L x W x H): 2,500 x 4,600 x 1,600 mm
Control System: Omron NX1P2 PLC, NB7W touch HMI
Servo System: Inovance servo drive, Omron motion module
Pneumatics: SMC valves, AirTac cylinders
Best-Fit Products: Stationery, red envelopes, kraft envelopes, flat print goods
Build Tier: Standard production build — the JCJ130 is the compact build
View Machine

How to Choose a Bamboo & Wood Packing Machine

Eight decisions frame the specification. Work them in order and the machine ends up matched to your product — not the other way around.

1. Product Type

Skewer, stirrer, craft stick or cane. Length spread and count drive the infeed.

2. Throughput

High counts at modest speeds — size the class to the output the line sustains.

3. Film Material

Plain foodservice film or printed retail film; compostability targets follow the market.

4. Seal Technology

Seals that close through wood dust — seal-jaw contamination is the failure mode to design out.

5. Package Format

Counted packs from tens to hundreds. Count drives grouping.

6. Natural Variation

Warp, knots and rough ends vary piece to piece — the infeed must tolerate the worst piece in the bundle.

7. Configuration and Delivery

Counting integration at high counts extends delivery. Fix the count spec early.

8. Run the Numbers

Shortlist machines before you quote — enter product size, format and target output in the free selector at tool.path-pack.com; it returns matching machine families and film widths in one pass.

Frequently Asked Questions

Can wooden sticks be flow wrapped?

Yes — slender wood products convey counted into film and seal as hundred-count packs. Length spread and dust set the engineering focus.

How do high counts feed?

Counting and stacking sit ahead of the wrapper in the same line — the count that enters is the count that seals.

What about bamboo versus wood?

Same route — bamboo runs straighter and cleaner, wood varies more. The infeed tolerates the variation either way.

What speeds are available for bamboo and wood packing?

Configurations for this format span our full flow-wrapping range — 5 to 300 packs/min. The right class depends on your product, film and format; match speed to what your line actually sustains, not the headline number.

Why Path Pack

We start with the product, not the machine. Every project runs through the same nine-step engineering process — product, format, film, speed, feeding, sealing, structure, integration, testing — before a configuration is quoted.
Your products run on real machines with your film at your target speed before anything ships. High-count natural formats are exactly what the configuration review is for.
Evaluate your requirements with our online tools: the machine finder and bag calculator narrow the configuration before you ever talk to us.

Have a Packaging Problem Worth Solving?

×

Do you have questions about packaging machines? Do not hesitate to contact us.

Your email goes directly to our co-founder’s inbox and our sales team.

We will reply within One Working Day.

1