Opens in a new tab

Dairy & Cheese Packing Solutions

Butter portions, cheese slices and retail blocks — sealed clean on grease-resistant film, at dairy-plant temperatures.

Why Flow Wrapping for Dairy & Cheese

Dairy packaging fights fat, not speed — film and sealing do the heavy lifting before the machine is ever chosen.

Fat Resists Sealing

Butter and cheese surfaces defeat ordinary films. Grease-resistant film selection is the first engineering decision, not an afterthought.

Portions in 4-Side Seal

Single portions and dose formats seal as countable sachets — the format retail multipacks are built on.

Blocks in Pillow Packs

Retail blocks and long cuts wrap as tight pillow packs with the product visible through print-registered film.

Cold-Room Reality

The machine has to start, seal and change over at dairy-plant temperatures — not just on a warm show floor.

One Format Range, Many SKUs

Portions, slices and blocks on one configured range, with format changeover measured in minutes.

Industry References

Dairylea slices (16-pack) — the cheese stack wrapped directly in a flow-wrapped pillow pack: no outer bag, no tray.
Cheestrings — each 20 g cheese stick is individually packaged in a flow-wrapped pillow pack inside the multipack: portion formats beyond the slice stack.

Dairy & Cheese Formats

Portion control defines dairy packing — counted, sealed, chilled formats across cheese and butter lines.

Cheese Portions

Individually wrapped portions — the deli-counter and foodservice standard, flow-wrapped one per pack.

Cheese Sticks & Strings

Single-serve sticks in tight pillow packs — a high-count, print-registered format.

Butter & Fat Blocks

Block formats wrap flat and tight — sealing parameters matched to fat content.

Dairy Multipacks

Portion bundles into family packs — counted multipacks on the same route as singles.

Machines for Dairy & Cheese

One engineering standard across three machine families — flow wrappers, four-side-seal sachet machines and horizontal premade-pouch lines. Every machine below is configured around the product it runs — each card links to the full machine page for detailed specs.

Flow Wrapping (HFFS) — portions, slices and blocks

Portion, slice and block configurations — film and sealing validated with your dairy product.
jc250 flow wrapping machine

JC250 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-100 mm, length 85-300 mm, height 5-30 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-240 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 600 kg
Dimensions (L×W×H): 4000 × 920 × 1500 mm
View Machine
jc420 flow wrapping machine

JC420 Flow Wrapping Machine

Production Rate: 35-150 packs/min (product-dependent)
Pack Size Range: Product width 30-180 mm, length 115-350 mm, height 5-45 mm
Pack Style: Back-seal pillow packs formed from roll film
Cutter: Single sealing jaw
Film Width: 90-430 mm
Packaging Films: OPP, PE, PVC, OPP/CPP, PT/PE, KOP/CPP and similar heat-sealable laminates
Drive: 3 servo motors with planetary gears
Bag Form Qualified Rate: ≥97%
Sealing Pressure: 15 N/mm²
Control Set: In-house-designed PLC; MCGS touchscreen; RiDing servo motors
Machine Noise: ≤78 dB
Total Power: 3.0 kW, 220 V / 50 Hz
Machine Weight: 800 kg
Dimensions (L×W×H): 4220 × 950 × 1600 mm
View Machine
PP180R Flow Wrapping Machine

PP180R Flow Wrapping Machine

Production Rate: 4,800 packs/hour (80 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, slurries, powders and similar products
Packaging Films: PE, PP, CPP, OPP, PET, PA (NY), VMPET, VMCPP foil laminates and aluminum-foil paper bags
Pack Size Range: Width 60-90 mm, height 80-150 mm
Max. Filling Volume: 100 ml (depends on product type)
Filling Accuracy: ±1.5%
Filling Stations: 2
Pack Style: Pillow packs (back seal) formed from roll film
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Total Power: 10 kW, 380 V / 50 Hz
Machine Weight: 2,000 kg
Dimensions (L×W×H): 4500 × 970 × 1500 mm
Frame Material: 304 stainless steel covers; carbon-steel body with spray coating
Core Components: Mitsubishi PLC; Weintek touchscreen HMI; Siemens low-voltage electrics; relays by Siemens or Schneider; Italian photo-eye registration
View Machine

Four-Side-Seal Sachet Machines — flat sachets and portion packs

Flat sachets sealed on all four sides — portion-controlled, shelf-ready packs for flat products and counted single serves.

Horizontal Pouch Packing Machines — stand-up, zipper and spout pouches

Pouch formats for dairy portions — configuration confirmed per format.
PP180FS Horizontal Pouch Packing Machine

PP180FS Horizontal Pouch Packing Machine

Production Rate: 9,600 packs/hour (160 packs/min); actual speed depends on product and fill weight
Applicable Materials: Raw pulp, liquid and sauce/paste products
Pouch Size Range: Width 50-90 mm, height 100-280 mm
Max. Filling Weight: 200 g (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 6 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,600 kg
Dimensions (L×W×H): 3650 × 1530 × 1180 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: AirTAC pneumatics; Inovance (China) PLC, VFD and touchscreen; Zhongde (China) vacuum pump
View Machine
PP200F Horizontal Pouch Packing Machine

PP200F Horizontal Pouch Packing Machine

Production Rate: 8,400 packs/hour (140 packs/min); actual speed depends on product and fill weight
Applicable Materials: Raw slurry, liquid and paste products
Pouch Size Range: Width 50-100 mm, height 100-280 mm
Max. Filling Volume: 300 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 6 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,600 kg
Dimensions (L×W×H): 4000 × 1270 × 1535 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
View Machine
PP180D Horizontal Pouch Packing Machine

PP180D Horizontal Pouch Packing Machine

Production Rate: 6,000 packs/hour (100 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, granules, pills, capsules and similar products
Pouch Size Range: Width 50-90 mm, height 100-280 mm
Max. Filling Weight: 200 g (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,000 kg
Dimensions (L×W×H): 2980 × 1345 × 1340 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
View Machine
PP420F Horizontal Pouch Packing Machine

PP420F Horizontal Pouch Packing Machine

Production Rate: 1,800 packs/hour (30 packs/min); actual speed depends on product and fill weight
Applicable Materials: Bag-in-bag, liquid, sauce/paste, solid and powder products
Pouch Size Range: Width 80-210 mm, height 100-300 mm
Max. Filling Volume: 1,000 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 500 kg
Dimensions (L×W×H): 1503 × 823 × 1000 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
View Machine
PP400 Horizontal Pouch Packing Machine

PP400 Horizontal Pouch Packing Machine

Production Rate: 3,000 packs/hour (50 packs/min); actual speed depends on product and fill weight
Pouch Size Range: Width 55-200 mm, height 100-280 mm
Max. Filling Volume: 1,000 ml (depends on product type)
Applicable Materials: Powders, liquids, granules and similar products
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,000 kg
Dimensions (L×W×H): 2900 × 1000 × 1360 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
View Machine
PP180F Horizontal Pouch Packing Machine

PP180F Horizontal Pouch Packing Machine

Production Rate: 9,600 packs/hour (160 packs/min); actual speed depends on product and fill weight
Applicable Materials: Raw pulp, liquid and viscous sauce products
Pouch Size Range: Width 50-90 mm, height 100-280 mm
Max. Filling Volume: 200 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 6 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,500 kg
Dimensions (L×W×H): 3650 × 1530 × 1180 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: AirTAC pneumatics; Inovance (China) PLC, VFD and touchscreen; Zhongde (China) vacuum oil pump
View Machine
PP180 Horizontal Pouch Packing Machine

PP180 Horizontal Pouch Packing Machine

Production Rate: 3,000 packs/hour (50 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, granules, pills, capsules and similar products
Pouch Size Range: Width 55-200 mm, height 100-280 mm
Max. Filling Weight: 1,000 g (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,000 kg
Dimensions (L×W×H): 2980 × 1345 × 1340 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
View Machine
PP320 Horizontal Pouch Packing Machine

PP320 Horizontal Pouch Packing Machine

Production Rate: 4,200 packs/hour (70 packs/min); actual speed depends on product and fill weight
Applicable Materials: Powders, liquids, solids and similar products
Pouch Size Range: Width 60-160 mm, height 100-280 mm
Max. Filling Volume: 1,000 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 7 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,500 kg
Dimensions (L×W×H): 3500 × 1000 × 1390 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
View Machine

Complete the Line — cartoning, blister and sleeving

Cartoning, blister packing and bag sleeving machines that pair with the packers above — one line, one engineering standard. The line does not end at the seal — carton with JC130 or JCH200, blister-pack with JCP100, JCP180 or JCP270, sleeve with JCJ130 or JCS130.
jc130 horizontal cartoning machine

JC130 Horizontal Cartoning Machine

Production Rate: 20-60 cartons/min (carton- and product-dependent)
Carton Material: 250-400 g/m² board
Carton Size Range (L×W×H): 70-210 mm × 60-150 mm × 15-60 mm
Medical-Build Window: Quoted medical build verified at 80-110 × 80-110 × 30-90 mm — checked per carton
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Feeding: 4-station product auto feeder; 5- and 10-station feeders to order; carton erecting, insertion and sealing
Options: Leaflet folding device; glue-sealing unit; single-side label sealing unit
Rejection: Auto-reject for cartons missing product or leaflet; overload auto-stop
Control Set: Siemens PLC, touchscreen, frequency converter and servo; SMC valves, cylinders, vacuum and air preparation; Sick and Omron sensors
Compressed Air: ≥0.6 MPa, 120-160 L/min
Total Power: 1.5 kW, 220/380 V / 50 Hz
Machine Weight: 2,800 kg
Dimensions (L×W×H): 4620 × 1210 × 1800 mm
View Machine
jch200 high-speed cartoning machine

JCH200 High-Speed Cartoning Machine

Production Rate: 200 cartons/min
Carton Styles: Tuck-in, auto-lock bottom, hang-tab
Product Family: Coffee and snack pouches, sachet multipacks, bottled pharma, kit sets — the JC cartoning range
Configuration: Built to order around your carton and product
View Machine

How to Choose a Dairy Packing Machine

Eight decisions frame the specification. Work them in order and the machine ends up matched to your product — not the other way around.

1. Product Type

Portion, slice, block or long cut. Fat content drives film choice — and natural cheese carries more free fat and stickier cut edges than processed: spec anti-stick surfaces on product-contact guides and easy seal-zone access for cleaning.

2. Throughput

Portion lines run high count; blocks run heavy. Class follows format.

3. Film Material

Grease-resistant laminates are the baseline, not an upgrade.

4. Seal Technology

Seal parameters must be validated against fatty product surfaces under actual plant operating temperatures.

5. Package Format

4-side-seal portions vs pillow packs for blocks — often both, on one configured range.

6. Hygiene and Food Contact

Cold-room operation, food contact rules, and washdown protocols drive machine construction and electrical enclosure ratings.

7. Configuration and Delivery

Cold-room options and format ranges extend delivery. Lock the SKU mix early.

8. Run the Numbers

Shortlist machines before you quote — enter product size, format and target output in the free selector at tool.path-pack.com; it returns matching machine families and film widths in one pass.

Frequently Asked Questions

Flow wrap or pouch for dairy products?

Portions and doses suit 4-side-seal sachets; blocks and long cuts suit pillow packs. Many dairies run both formats on one configured range. The slice stack in a flow-wrapped pillow pack is the category's workhorse — Dairylea packages 16 slices in this format.

Why is film so critical for butter and cheese?

Fat defeats ordinary films — grease-resistant laminates are the baseline. Film is chosen against the actual product before machine structure is fixed.

Can the machines work in cold rooms?

Cold-room operation is a configuration question — starting, sealing and changeover at dairy-plant temperatures get specified, not assumed.

What speeds are available for dairy packing?

Configurations for this format span our full flow-wrapping range — 5 to 300 packs/min. The right class depends on your product, film and format; match speed to what your line actually sustains, not the headline number.

Why Path Pack

We start with the product, not the machine. Every project runs through the same nine-step engineering process — product, format, film, speed, feeding, sealing, structure, integration, testing — before a configuration is quoted.
Your dairy product runs on real machines with your film at your target speed before anything ships — film behaviour is step three of our engineering process for a reason.
Evaluate your requirements with our online tools: the machine finder and bag calculator narrow the configuration before you ever talk to us.

Have a Packaging Problem Worth Solving?

×

Do you have questions about packaging machines? Do not hesitate to contact us.

Your email goes directly to our co-founder’s inbox and our sales team.

We will reply within One Working Day.

1