Cosmetics & Beauty Packing Solutions
Lipsticks, mascaras, compacts and beauty sets — small, high-value products that sell sealed, counted and shelf-ready.
Why Flow Wrapping for Cosmetics & Beauty
Beauty packaging is a shelf-presence question before it is a machine question — the wrap is the first thing the customer touches.
Sealed Reads Premium
A tight, clear wrap signals untouched product — tamper evidence that reads as finish rather than plastic.
Small and Counted
Beauty products sell by count — one lipstick, a twin pack of mascaras, a set of minis. Counting sits ahead of the wrapper in the same line.
The Wrap Sells It
Clear film shows the product; printed film carries the brand. Either way the pack does the shelf work without a carton.
Finish Is Everything
Glossy components scratch and mark — horizontal conveying carries them into the film without scuffing drops.
Sets and Seasons
Gift sets and travel minis bundle as one sealed pack — the format that carries seasonal beauty retail.
Industry References
Fragrance cartons at beauty counters arrive with a tight flow-wrapped film overwrap — tamper evidence and shelf finish in one pass.
Beauty gift sets bundle minis in one sealed counted pack — the seasonal format where the set is the product.
References describe publicly available retail pack formats as illustrations — they are not Path Pack customer cases.
Machines for Cosmetics & Beauty
One engineering standard across three machine families — flow wrappers, four-side-seal sachet machines and horizontal premade-pouch lines. Every machine below is configured around the product it runs — each card links to the full machine page for detailed specs.
Flow Wrapping (HFFS) — components, sets and carton overwrap
Component, set and overwrap configurations — film and handling requirements set by your actual products.
Four-Side-Seal Sachet Machines — flat sachets and portion packs
Flat sachets sealed on all four sides — portion-controlled, shelf-ready packs for flat products and counted single serves.
JC800 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-6, built to order
Max. Film Width: 880 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film-curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC600 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-4, built to order
Max. Film Width: 600 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC700 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-5, built to order
Max. Film Width: 700 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC400 Four-Side-Seal Patch Packing Machine
Production Rate: 80-180 packs/min
Pack Size Range: Length 100-280 mm, width 85-160 mm, height 1-10 mm
Product Height Limit: 10 mm maximum
Max. Film Width: 400 mm
Max. Film Reel Dia.: 400 mm
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other single- or double-layer heat-sealable laminates
Drive: Full servo control system
Feeder: Custom-made 2-station pushing-type feeder (hand-loaded)
Printing: Ink-wheel printer standard; ink-jet option (20 languages; dates, QR and barcodes, logo marks; up to 406 m/min)
Film Handling: Auto tension controller; 2 servo film-direction correction devices plus master correction sensor on the back film frame
Quality Control: Optical fiber detection with kick-out station
Control Set: Panasonic PLC; MCGS or YiFan touchscreen; Inovance servo motors and drivers; AirTAC/SMC valves; Panasonic photoelectronics
Total Power: 10 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,000 kg
JC800Z Multi-Lane Patch Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2 (zipper-dedicated build)
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Width: 880 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Zipper: Double-side zipper heating system
Feeders: 2 rotary soft-gel patch feeders with loading magazines
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
Horizontal Pouch Packing Machines — stand-up, zipper and spout pouches
Pouch formats for beauty sets and counted packs — configuration confirmed per format.
Complete the Line — cartoning, blister and sleeving
Cartoning, blister packing and bag sleeving machines that pair with the packers above — one line, one engineering standard.
JCP100 Blister Packing Machine
Punch Frequency: 10-38 strokes/min
Production Capacity: 1,980 boards/hour
Stations: 4 — PVC forming, feeding, heat sealing, blanking
Max. Forming Area & Depth: 80 × 120 mm, up to 24 mm deep
Standard Board Size: 80 × 57 mm (designed to order)
Stroke Range: 35-75 mm (designed to order)
Packaging Materials: PVC 0.15-0.5 × 120 mm; PTP aluminum foil 0.02-0.035 × 120 mm; dialysis paper 50-100 g × 120 mm
Missing-Fill Control: Omron-sensor detection with reject station (configured to order)
Drive: Row-chain transmission, frequency-converter speed control; servo traction available
Control Set: Delta PLC; Weinview touchscreen; Inovance servo; Omron encoder
Air Pressure: 0.6-0.8 MPa
Total Power: 2.4 kW, 220 V / 50 Hz (main motor 0.75 kW)
Machine Noise: <75 dB(A)
Machine Weight: 350 kg
Dimensions (L×W×H): 1996 × 592 × 1229 mm
JCP180 Blister Packing Machine
Punch Frequency: 20-40 strokes/min (alu-plastic); 10-40 strokes/min (alu-alu)
Production Capacity: 40,000-80,000 tablets/hour
Max. Forming Area: 170 × 120 mm (alu-plastic); 160 × 120 mm (alu-alu)
Max. Forming Depth: 5-25 mm (deeper draws designed to order)
Stroke Range: 40-125 mm, adjustable
Standard Board Size: 80 × 57 mm
Packaging Materials: Pharmaceutical PVC 180 × 0.2-0.5 mm; PTP aluminum foil 180 × 0.02-0.03 mm
Traction: Servo traction as standard
Control Set: Delta PLC; Weinview touchscreen; Inovance 750 W servo; Omron encoder and proximity switch
Compressed Air: ≥0.11 m³/min
Cooling Water: Tap or recycled water, 50 L/h
Total Power: 5.5 kW, 380 V / 50 Hz
Machine Weight: 1,100 kg (split body for elevators and cleanrooms)
Dimensions (L×W×H): 2670 × 600 × 1530 mm
JCP270 Blister Packing Machine
Platform: Four-station blister architecture of the JCP line
Molds: Custom-shaped, designed to your product
Materials: Aluminum-plastic and aluminum-aluminum blister families
Configuration: Board size and cavitation engineered to order
How to Choose a Cosmetics Packing Machine
Seven decisions frame the specification. Work them in order and the machine ends up matched to your product — not the other way around.
1. Product Type
Lipstick, mascara, compact or full gift set. Geometry and count drive the infeed.
2. Throughput
Beauty lines favour gentle handling over headline speed — match the class to the output the line sustains.
3. Film Material
Clear film to show the product, printed film to carry the brand — barrier needs follow the formulation.
4. Seal Technology
Positive seals on glossy components, validated at speed — seal marks on a premium pack are rework.
5. Package Format
Singles, counted sets or carton overwrap. Format drives film width and grouping.
6. Finish and Materials
Glossy, metallised and irregular components demand scratch-free conveying and precise film tension.
7. Configuration and Delivery
Counting and set assembly extends delivery. Define the set contents and seasonal formats early.
Frequently Asked Questions
Can cosmetics be flow wrapped?
Yes — counted components and full sets convey into film and seal as shelf-ready packs. Carton overwrap runs the same route.
What about gift sets and minis?
Grouped minis seal as one counted pack with contents defined infeed — the seasonal set format.
Does premium packaging need special film?
Finish requirements decide — clear glossy film to show the product, printed film for branding; the machine seals whatever your brand standard specifies.
What speeds are available for beauty packing?
Configurations for this format span our full flow-wrapping range — 5 to 300 packs/min. The right class depends on your product, film and format; match speed to what your line actually sustains, not the headline number.
Why Path Pack
We start with the product, not the machine. Every project runs through the same nine-step engineering process — product, format, film, speed, feeding, sealing, structure, integration, testing — before a configuration is quoted.
Your components run on real machines with your film at your target speed before anything ships. Finish-critical formats are exactly what the configuration review is for.
Evaluate your requirements with our online tools: the machine finder and bag calculator narrow the configuration before you ever talk to us.