Medical & Healthcare Packing Solutions
Rapid test cassettes, diagnostic accessories and single-use disposables — counted, sealed and coded, on formats driven by healthcare requirements.
Why Flow Wrapping for Medical & Healthcare
Healthcare packaging is a compliance question before it is a machine question — the format follows the standard, and the machine follows the format.
Counted and Nothing Else
A kit missing one component is a failed kit. Counting and grouping sit ahead of the wrapper in the same line — the count that enters is the count that seals.
Cleanliness Follows the Standard
Wrapped disposables stay untouched from line to point of use. How clean the pack must be — and whether sterile-barrier rules apply — is defined by your standard, not assumed by us.
One Cassette, One Pack
Test cassettes and strips wrap as single flow-wrapped pillow packs — countable, printable and readable as unit-of-use.
Print Is the Record
Lot codes, expiry dates and device identification print on registered film — the traceability record lives on the pack itself.
Small Runs Are Real Runs
Healthcare lines start small and validate hard. The route from pilot to production stays the same, so the validated format is the one that scales.
Industry References
Rapid antigen tests shipped one cassette per flow-wrapped pillow pack alongside buffer and lancet — the counted-kit format at global scale.
First-aid and clinical procedure packs bundle gauze, wipes and instruments in one sealed wrap — the grouped-kit format across healthcare supply.
References describe publicly available retail pack formats as illustrations — they are not Path Pack customer cases.
Machines for Medical & Healthcare
One engineering standard across three machine families — flow wrappers, four-side-seal sachet machines and horizontal premade-pouch lines. Every machine below is configured around the product it runs — each card links to the full machine page for detailed specs.
Flow Wrapping (HFFS) — cassettes and counted disposables
Counted-cassette and disposable configurations — film, sealing and cleanliness requirements confirmed against your product and compliance scope.
PP180R Flow Wrapping Machine
Production Rate: 4,800 packs/hour (80 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, slurries, powders and similar products
Packaging Films: PE, PP, CPP, OPP, PET, PA (NY), VMPET, VMCPP foil laminates and aluminum-foil paper bags
Pack Size Range: Width 60-90 mm, height 80-150 mm
Max. Filling Volume: 100 ml (depends on product type)
Filling Accuracy: ±1.5%
Filling Stations: 2
Pack Style: Pillow packs (back seal) formed from roll film
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Total Power: 10 kW, 380 V / 50 Hz
Machine Weight: 2,000 kg
Dimensions (L×W×H): 4500 × 970 × 1500 mm
Frame Material: 304 stainless steel covers; carbon-steel body with spray coating
Core Components: Mitsubishi PLC; Weintek touchscreen HMI; Siemens low-voltage electrics; relays by Siemens or Schneider; Italian photo-eye registration
Four-Side-Seal Sachet Machines — flat sachets and portion packs
Flat sachets sealed on all four sides — portion-controlled, shelf-ready packs for flat products and counted single serves.
JC800 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-6, built to order
Max. Film Width: 880 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film-curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC600 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-4, built to order
Max. Film Width: 600 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC700 Multi-Lane Sachet Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2-5, built to order
Max. Film Width: 700 mm
Zipper: Optional reclosable zipper
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
JC400 Four-Side-Seal Patch Packing Machine
Production Rate: 80-180 packs/min
Pack Size Range: Length 100-280 mm, width 85-160 mm, height 1-10 mm
Product Height Limit: 10 mm maximum
Max. Film Width: 400 mm
Max. Film Reel Dia.: 400 mm
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other single- or double-layer heat-sealable laminates
Drive: Full servo control system
Feeder: Custom-made 2-station pushing-type feeder (hand-loaded)
Printing: Ink-wheel printer standard; ink-jet option (20 languages; dates, QR and barcodes, logo marks; up to 406 m/min)
Film Handling: Auto tension controller; 2 servo film-direction correction devices plus master correction sensor on the back film frame
Quality Control: Optical fiber detection with kick-out station
Control Set: Panasonic PLC; MCGS or YiFan touchscreen; Inovance servo motors and drivers; AirTAC/SMC valves; Panasonic photoelectronics
Total Power: 10 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,000 kg
JC800Z Multi-Lane Patch Packing Machine
Production Rate: 50-180 packs/min
Sealing Lanes: 2 (zipper-dedicated build)
Pack Size Range: Length 100-280 mm, width up to 220 mm, height 1-8 mm
Max. Film Width: 880 mm
Max. Film Reel Dia.: 400 mm
Drive: 10-servo system on a TRIO motion controller
Zipper: Double-side zipper heating system
Feeders: 2 rotary soft-gel patch feeders with loading magazines
Printing: 2 ink-wheel printers (ink-jet upgrade available)
Film Handling: 2 servo film-direction correction devices, back-roll correction sensor, auto tension controller
Cutters: Custom bag cutter (round-corner type) and custom easy-tear cutter
Waste Handling: Waste-film curling machine
Packaging Films: ET+OPP, BOPP, CPP, PET+AL and other heat-sealable laminates
Control Set: TRIO PLC and motion controller; MCGS touchscreen; Inovance servos; Schneider contactors, breakers and E-stop; Panasonic eyemark sensor
Compressed Air: 0.3 m³/min
Total Power: 14-15 kW, AC 380 V / 50 Hz, 3-phase
Machine Weight: 2,500 kg
Horizontal Pouch Packing Machines — stand-up, zipper and spout pouches
The JC400-PF covers sealed pouch formats for healthcare and hygiene products — configuration confirmed per format.
PP190P Horizontal Pouch Packing Machine
Production Rate: 3,000 packs/hour (50 packs/min); actual speed depends on product and fill weight
Applicable Materials: Granules, powders, liquids and similar products
Pouch Size Range: Width 50-200 mm, height 100-280 mm
Max. Filling Volume: 1,000 ml (depends on product type)
Filling Stations: 2
Pouch Shape: Flat and stand-up pouches
Air Consumption: 300 L/min
Total Power: 5 kW
Machine Weight: 2,000 kg
Dimensions (L×W×H): 3150 × 1195 × 1120 mm
PP180 Horizontal Pouch Packing Machine
Production Rate: 3,000 packs/hour (50 packs/min); actual speed depends on product and fill weight
Applicable Materials: Liquids, granules, pills, capsules and similar products
Pouch Size Range: Width 55-200 mm, height 100-280 mm
Max. Filling Weight: 1,000 g (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,000 kg
Dimensions (L×W×H): 2980 × 1345 × 1340 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
PP320 Horizontal Pouch Packing Machine
Production Rate: 4,200 packs/hour (70 packs/min); actual speed depends on product and fill weight
Applicable Materials: Powders, liquids, solids and similar products
Pouch Size Range: Width 60-160 mm, height 100-280 mm
Max. Filling Volume: 1,000 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 7 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,500 kg
Dimensions (L×W×H): 3500 × 1000 × 1390 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
PP190 Horizontal Pouch Packing Machine
Production Rate: 6,000 packs/hour (100 packs/min); actual speed depends on product and fill weight
Applicable Materials: Granules, powders, liquids and similar products
Pouch Size Range: Width 50-95 mm, height 100-280 mm
Max. Filling Volume: 200 ml (depends on product type)
Filling Stations: 2
Pouch Shape: Flat and stand-up pouches
Air Consumption: 300 L/min
Total Power: 5 kW
Machine Weight: 2,000 kg
Dimensions (L×W×H): 3150 × 1195 × 1120 mm
PP880 Side-Gusset Pouch Packing Machine
Production Rate: 900 packs/hour (15 packs/min); actual speed depends on product and fill weight
Applicable Materials: Granules, powders, liquids and similar products
Pouch Size Range: Width 120-440 mm, height 150-650 mm
Max. Filling Volume: 10 kg (depends on product type)
Filling Stations: 1
Pouch Shape: Gusset pouches
Air Consumption: 300 L/min
Total Power: 5 kW
Machine Weight: 800 kg
Dimensions (L×W×H): 2300 × 1000 × 1390 mm
PP400D Horizontal Pouch Packing Machine
Production Rate: 6,000 packs/hour (100 packs/min); actual speed depends on product and fill weight
Pouch Size Range: Width 50-90 mm, height 100-280 mm
Max. Filling Volume: 200 ml (depends on product type)
Applicable Materials: Powders, liquids, granules and similar products
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,000 kg
Dimensions (L×W×H): 2900 × 1000 × 1360 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: SMC (Japan) pneumatics; Siemens PLC, VFD and touchscreen; ORION (Japan) oil-free vacuum pump
PP880T Horizontal Pouch Packing Machine
Production Rate: 900 packs/hour (15 packs/min); actual speed depends on product and fill weight
Applicable Materials: Granules, liquids, powders and similar products
Pouch Size Range: Width 120-440 mm, height 150-650 mm
Max. Filling Weight: 10 kg (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 4 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 800 kg
Dimensions (L×W×H): 2300 × 1000 × 1390 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: AirTAC pneumatics (cylinders, solenoid and vacuum valves); Siemens PLC, VFD and touchscreen; ORION (Japan) vacuum pump
PP180F Horizontal Pouch Packing Machine
Production Rate: 9,600 packs/hour (160 packs/min); actual speed depends on product and fill weight
Applicable Materials: Raw pulp, liquid and viscous sauce products
Pouch Size Range: Width 50-90 mm, height 100-280 mm
Max. Filling Volume: 200 ml (depends on product type)
Filling Accuracy: ±1.5%
Packing Materials: PE, PP, CPP, OPP, PET, PA (NY), VMPET / VMCPP foil pouches, foil paper bags
Total Power: 6 kW
Power Supply: 220V / 380V / 450V
Air Consumption: 0.6 m³/min
Air Pressure: 0.6 MPa
Machine Weight: 2,500 kg
Dimensions (L×W×H): 3650 × 1530 × 1180 mm
Frame Material: 304 stainless steel housing; coated carbon steel frame
Core Components: AirTAC pneumatics; Inovance (China) PLC, VFD and touchscreen; Zhongde (China) vacuum oil pump
Complete the Line — cartoning, blister and sleeving
Cartoning, blister packing and bag sleeving machines that pair with the packers above — one line, one engineering standard.
JCP100 Blister Packing Machine
Punch Frequency: 10-38 strokes/min
Production Capacity: 1,980 boards/hour
Stations: 4 — PVC forming, feeding, heat sealing, blanking
Max. Forming Area & Depth: 80 × 120 mm, up to 24 mm deep
Standard Board Size: 80 × 57 mm (designed to order)
Stroke Range: 35-75 mm (designed to order)
Packaging Materials: PVC 0.15-0.5 × 120 mm; PTP aluminum foil 0.02-0.035 × 120 mm; dialysis paper 50-100 g × 120 mm
Missing-Fill Control: Omron-sensor detection with reject station (configured to order)
Drive: Row-chain transmission, frequency-converter speed control; servo traction available
Control Set: Delta PLC; Weinview touchscreen; Inovance servo; Omron encoder
Air Pressure: 0.6-0.8 MPa
Total Power: 2.4 kW, 220 V / 50 Hz (main motor 0.75 kW)
Machine Noise: <75 dB(A)
Machine Weight: 350 kg
Dimensions (L×W×H): 1996 × 592 × 1229 mm
JCP180 Blister Packing Machine
Punch Frequency: 20-40 strokes/min (alu-plastic); 10-40 strokes/min (alu-alu)
Production Capacity: 40,000-80,000 tablets/hour
Max. Forming Area: 170 × 120 mm (alu-plastic); 160 × 120 mm (alu-alu)
Max. Forming Depth: 5-25 mm (deeper draws designed to order)
Stroke Range: 40-125 mm, adjustable
Standard Board Size: 80 × 57 mm
Packaging Materials: Pharmaceutical PVC 180 × 0.2-0.5 mm; PTP aluminum foil 180 × 0.02-0.03 mm
Traction: Servo traction as standard
Control Set: Delta PLC; Weinview touchscreen; Inovance 750 W servo; Omron encoder and proximity switch
Compressed Air: ≥0.11 m³/min
Cooling Water: Tap or recycled water, 50 L/h
Total Power: 5.5 kW, 380 V / 50 Hz
Machine Weight: 1,100 kg (split body for elevators and cleanrooms)
Dimensions (L×W×H): 2670 × 600 × 1530 mm
JCP270 Blister Packing Machine
Platform: Four-station blister architecture of the JCP line
Molds: Custom-shaped, designed to your product
Materials: Aluminum-plastic and aluminum-aluminum blister families
Configuration: Board size and cavitation engineered to order
How to Choose a Medical & Healthcare Packing Machine
Seven decisions frame the specification. Work them in order and the machine ends up matched to your product — not the other way around.
1. Product Type
Cassette, strip, disposable device or hygiene item. Count and geometry drive the infeed.
2. Throughput
From pilot runs to steady production — size the class to the output your validation actually supports.
3. Film Material
Print-registered film carries lot and expiry data; barrier needs follow the product's sensitivity.
4. Seal Technology
Positive, repeatable seals validated with your film at speed — a soft seal here is a compliance failure, not a cosmetic one.
5. Package Format
Unit-of-use singles, counted kits or sealed pouches. Format drives the route.
6. Construction and Environment
Cleanliness standards for the packing environment and machine materials follow your compliance scope — specify them before the configuration locks.
7. Configuration and Delivery
Counting, printing and verification integration extends delivery. Spec the kit contents and coding requirements early.
Frequently Asked Questions
Is flow wrapping suitable for medical disposables?
Yes — counted disposables and test cassettes convey into the film and seal as unit-of-use packs. The engineering focus is counting integrity, print registration and seal validation.
Do your machines produce sterile-barrier packs?
Sterile-barrier requirements are defined by standards such as ISO 11607 and sit in your compliance scope. We configure the packing format around the standard you must meet; validation stays on your side of the line.
Can kits bundle multiple components?
Yes — grouped kits seal as one counted pack with the components defined infeed. Kit content and count drive the feeding design.
What speeds are available for healthcare packing?
Configurations for this format span our full flow-wrapping range — 5 to 300 packs/min. The right class depends on your product, film and format; match speed to what your line actually sustains, not the headline number.
Why Path Pack
We start with the product, not the machine. Every project runs through the same nine-step engineering process — product, format, film, speed, feeding, sealing, structure, integration, testing — before a configuration is quoted.
Your components run on real machines with your film at your target speed before anything ships. Compliance-driven formats are exactly what the configuration review exists for.
Evaluate your requirements with our online tools: the machine finder and bag calculator narrow the configuration before you ever talk to us.